High Quality Business Card Design and Visiting Card Sizes

Business cards are cards bearing business information about a company or individual. They are shared during formal introductions as a convenience and a memory aid. A business card typically includes the giver’s name, company affiliation (usually with a logo) and contact information such as street addresses, telephone number(s), fax number, e-mail addresses and website. It can also include telex, bank account, tax code. Traditionally many cards were simple black text on white stock; today a professional business card will sometimes include one or more aspects of striking visual design. Business cards are frequently used during sales calls (visits) to provide potential customers with a means to contact the business or representative of the business.

High quality business cards without full-color photographs are normally printed using spot colors on sheetfed offset printing presses. Some companies have gone so far as to trademark their spot colors. To simulate the “raised-print” effect of printing with engraved plates, a less-expensive process called thermography was developed that uses the application of a plastic powder, which adheres to the wet ink.

Full color cards, or cards that use many colors, are printed on sheetfed presses as well; however, they use the CMYK (cyan, magenta, yellow, and black) four-color printing process. Screens of each color overprinted on one another create a wide gamut of color.

Some terminology in reference to full color printing:
* 4/0 – Full Color Front / No Print To Back
* 4/1 – Full Color Front / One color to reverse
* 4/4 – Full Color Front / Full Color Back

A business card can also be coated with a UV glossy coat (offset-uv Printing). The coat is applied just like another ink using an additional unit on a sheetfed press. That being said, UV coats can also be applied as a spot coating – meaning areas can be coated, and other areas can be left uncoated. This creates additional design potential.

When cards are designed, they are given bleeds if color extends to the edge of the finished cut size. (A bleed is the extension of printed lines or colors beyond the line where the paper it is printed on will be cut.) This is to help ensure that the paper will cut without white edges due to very small differences in where the blade cuts the cards, and it is almost impossible to cut the cards properly without. Just being a hair off can result in white lines, and the blade itself will pull the paper while cutting. The image on the paper can also shift from page to page which is called a bounce, which is generally off by a hairline on an offset press, but can be quite larger on lower end equipment such as a copier or a duplicator press. Bleeds are typically an extra 1?8 to 1?4 in to all sides of the card.
* Bleed Size: 3.759 × 2.25 in (1?8 in bleeds) (95.25 × 57.15 mm)
* Cut Size: 3.57 × 2 in (89 × 51 mm) (Depend on typography request)

If you like to know further, please contact Mitul Bhavsar on +91-9825095314 or visit www.designwebgraphic.com now.

Share on Facebook